Maternity Apron

The maternity apron features easy ties and a quick release buckle to secure the back and front panels; allowing complete adjustability during pregnancy. The maternity apron also includes an additional .50mm equivalent half apron for a total of 1.00mm Pb protection over the abdominal area and lower extremities. Please note, because this apron contains a lot of fabric, we do not recommend it in Standard Lead as it would be much too heavy.

Size Charts: Male | Female
How to Measure for your Apron

Product Information


Features

  • Premium foam padding in shoulders for extra comfort
  • Front and back panels ensure full protection from beginning to end of pregnancy
  • 0.50mm LE Half apron included for additional protection as pregnancy progresses
  • Comes with apron pocket
Apron Features: Made in the USA

Made in the USA

Apron Features: custom fitting available

Custom Fitting*

Apron Features: CE Certified

CE Certified


Maternity Apron Characteristics
  • Apron Type: Front and Back (full) Protection
  • Front Protection (thickness) Options: 0.25, 0.35, or 0.50mm LE
  • Back Protection (thickness) Options: 0.25mm LE
  • Core Material Options: Prolite, Premier or Nano
  • CE Certified: Yes
  • Closure Type: Tie and Buckle Closures
  • Customization Options: Embroidery, Logo, Axillary Wings, Extra Pocket
  • Custom fitting:* For a custom, made-to-measure apron, please (Contact us)

Average Maternity Apron Weights

Protech makes every effort to accurately record its apron weights. Because each category is averaged, the numbers we provide in the weight chart are subject to a +/- 15% weight variance. Minor length or width adjustments, including heavier fabrics, are not differentiated and instead, averaged together. Please consider this when referencing the weight chart. Weights are measured using at 0.50mm LE core material thickness.

SIZE LENGTH WIDTH NANO PREMIER PROLITE LEAD
X-Small 8.46 lbs 9.70 lbs 10.33 lbs 12.44 lbs
Small 35.75″ 19.25″ 9.79 lbs 11.23 lbs 11.95 lbs 14.40 lbs
Medium 39.00″ 19.50″ 10.84 lbs 12.44 lbs 13.23 lbs 15.95 lbs
Large 41.50″ 23.00″ 11.91 lbs 13.67 lbs 14.54 lbs 17.52 lbs
X-Large 43.00″ 24.00″ 12.98 lbs 14.89 lbs 15.84 lbs 19.08 lbs
2X-Large 44.50″ 27.00″ 14.96 lbs 17.16 lbs 18.26 lbs 22.00 lbs

Compliance Standards

Intended Use: Lead Garments are worn by healthcare professionals to protect them from the harmful effects of x-ray radiation during medical & other procedures requiring the use of x-ray/fluoroscopy. Lead garments are usually worn in combination with other products to provide complete protection from x-ray. You must ensure that your lead garment fits correctly and is properly worn for effective protection.

EN 61331-1:2014: (EU) Protective devices against diagnostic Medical X-ray radiation. (Determination of attenuation properties of material)
EN 61331-3:2014: (EU) Protective devices against diagnostic medical X-radiation Part 3: Protective clothing, Eyewear and Protective Patient shields.
ASTM 2547-18: (USA) Standard test method for determining the attenuation properties in a primary x-ray beam of materials used against radiation.


Maintaining Your Apron
Storage: Keep Lead Garment out of direct sunlight and prolonged exposure to extreme heat. Store at 70-80°F (21-27°C). Temperature limits are approximately 60-100°F (16-38°C). You may roll Lead Garment and transport in a Protech duffle bag or box, but never sharply fold or crease your Lead Garment. Always store Lead Garment on an appropriate metal hanger or lay flat on the ground or a countertop if hanger is not available.

Maintenance: Lead Garment fabrics can be cleaned by hand using mild soap diluted with room temperature water. Clorox hydrogen peroxide in diluted form is permissible. PDI Sani-Cloth® AF3 Germicidal Disposable Wipes are approved for use on Protech aprons.

Disposal: Users must dispose of Lead Garments and accessories by complying with local, state and federal (or international) regulations where applicable.

Warranty: Protech’s Lead Garments are warranted to be free of defects in materials and workmanship to the original purchaser for two years. If a defect appears, please contact us or an authorized reseller to begin the RMA process. You can also go directly to our Return Merchandise Form and begin the return process.

The warranty is void when the product has been tampered with, when repairs or attempted repairs have been made by unauthorized persons, or when the item has been subject to misuse, abuse or damage in transit. For more information on Returns, Repairs and Warranty, please visit our Shipping, Warranty and Returns page.



Reviews

There are no reviews yet.

Be the first to review “Maternity Apron”

Your email address will not be published. Required fields are marked *

Maternity Apron
This website uses cookies to improve your experience. By using this website you agree to our Data Protection Policy.
Read more